Painting has been presumed by many to be a difficult task but in reality, you can save a substantial amount of money when you do it yourself especially after learning the techniques of Interior
No need to hire a professional to do all the painting for you. On this article, I going to go into details about Interior Painting Techniques and from there, I assure you that you’ll be able to do all the painting more smoothly, faster and perfectly by yourself thus, giving you that professional looking finish to make you proud. You can be a self-made Interior painter with these Interior Painting techniques; much better than many Professional Interior Painters.
Interior Painting Techniques;
·To have a consistent color throughout your house or room, often mix your needed cans of paint, all in a large bucket. To have one uniform paint color on your walls, it would be good to mix all the paints together in one big bucket to eliminate the problem of having different coloring on your wall. Apparently, paint colors tend to vary slightly from different cans but somewhat same color such that, you can open a new can while in the middle of your wall then you find that the paint color aren’t the same thus, their difference may be noticeable.
The best you can do is to estimate the paint quantity or amount that you will need and mix it in a one big bucket. But if it happens that you are unable to give the exact estimate, always add more instead of less to be on the safer side. If you have leftovers, you can always pour them back into the cans.
·To get a perfect edge, let your paint dry off thereafter, cut the tape loose
When the paint gets dry; often they form a film that is, between your wall and the tape. Therefore, you cannot pull the tape from the trim. If you do so, it will tear the pieces of your
dried-paint off the wall. Henceforth, before pulling-off your tape, always cut it close but wait up-to 24 hours for your paint to completely dry-off. Use a sharp knife or even box cutter knife to help you cut through the film. In addition, while cutting the paint, pull-up your tape at a 45 degree-angle.
·Roll the full-height of your wall and keep its edge wet to avoid lap marks.
First, it is important to know what’s lap marks are. These are those ugly stripes that are often caused by uneven layers that result from paint build-up. On instances, they develop when you
roll-over paint that has partially dry already.
Therefore, to avoid lap marks always try to maintain a wet-edge such that each stroke of the roller overlaps your previous stroke that is, before your paint starts to dry. You can maintain wet edge by starting your painting from near a corner as you run your roller up-and-down the full height that is, of the wall while moving over thus, slightly with each stroke.
To even-out the thick runs or even spots, move your roller backwards where necessary. However, do not let your roller to start drying up, try to reload it as much as possible such that it’s
often a-least half loaded at all times.
Of course, you need a clean and neatly done paint hence, while painting, always keep the open-side of your roller frame to face the area that has been already painted. This is aim to put less-pressure thus, on the open-side of your roller and in-turn, you are unlikely to leave paint ridges.
·First, paint the trim, followed by the ceiling and walls
Just like professionals, you need to follow a certain order while painting your house. First, start by painting the trim which will be then followed by the ceiling and the walls later on. The main reason for doing this is because; it is much easier and faster to tape-off the trim compared to taping off the walls. You do not have to be that neat while painting the trim. You only need to concentrate on getting a smooth-finish on your woods. Paints are likely to get onto your walls but that should not be a problem as you can cover that later when you will be painting the walls.
After the trim has been completely painted as well as dry, tape it off using an easy-release painter’s tape or any available painter’s tape then paint your ceiling and then your
·Always clean dirty surfaces on your walls, ceiling and trim for the paint to form a strong bond.
Do not paint over oily and dirty surface as the paint will peel or chip off much easily. Hence, before you start painting, always clean out grimy areas using a heavy-duty or deglosser cleaner used for pre-paint cleaning. They are best for cleaning painted, enameled or even varnished surfaces thus; they improve the new paint adhesion.
You can use these cleaners to clean our greasy areas such as bathrooms and kitchen walls as well as remove hand-marks that are often formed around doorknobs and light switches.
To clean the walls, use a lint-free cloth or even abrasive pad with a cleaner while wiping in a circular-motion. But start from the bottom as you go up. After cleaning the surface fill-in any holes as well as nicks. Thereafter, sand them smooth that is, before painting. For safety measures, always wear rubber gloves as well as eye protection when painting. You can get these cleaners at paint stores as well as home centers. To get a smooth and clean painting, you can also follow these painting tips to help you out.
·For consistent texture, roll the paint along the edges
·Often use cotton drop cloths instead of plastic to absorb paint spills and provide a non-slip surface.
·On places where you are unable to keep a wet edge, you can opt to feather out paint to avoid paint build-up and minimize lap marks.
·To avoid having a blotchy finish, always prime & texture wall patches.
·To get an Ultra-smooth finish, sand-trim between coats.
Verdict- Painting can be a hobby but at the same time, you can personally paint your house or hire Loveland painters to avoid incurring more costs that you could have spent to pay for the services rendered by Interior Painters. With the above Interior painting techniques, you can paint your house by yourself with ease and much faster to have a smooth and clean finish look.